Electronic fluorescent lamp
Traditional fluorescent lamps are divided into two types: 1. Inductive fluorescent lamps (starters)
2. Electronic fluorescent lamp (no starter)
Our LED fluorescent lamp is compared with traditional fluorescent lamp
LED fluorescent lamp Replacement of inductive fluorescent lamp Advantage: No need to change any line without pulling up the starter
LED fluorescent lamp Replacement of electronic fluorescent lamp Advantage: no need to change any line
Â
Compatible with branded starter and ballast T8 fluorescent tube electronic inductance compatible LED tube , stepless LED tube , can be used directly without removing the ballast and starter
Product Features:
Built-in special power supply, so that the lamp can select any two PINs to connect to the power supply, so that the lamp can work normally, and other PINs that are not connected to the power supply are not charged.
Built-in special power supply, so that the lamp can select any two PINs to connect to the power supply, so that the lamp can work normally, and other PINs that are not connected to the power supply are not charged.
Welcome to contact
Contact:æŽé’18898355591
Mob phone
Compatible with LED fluorescent tube related parameters
Lamp material: high heat dissipation aluminum + fog / transparent PC cover
Number of LED lights: Highlight SMD3528 lamp tube size: 0.6 m / 1.2 m (L) * Φ26 mm
Rated power: 10W/20W
Number of LED lights: Highlight SMD3528 lamp tube size: 0.6 m / 1.2 m (L) * Φ26 mm
Rated power: 10W/20W
Actual power: 10W/20W±1.0W
Input voltage: AC100-240V
Working frequency: 50/60Hz
Power factor: 0.95 ~ 0.98
Service life: >30000H
Irradiation angle: 180 degree luminous flux: 800-900lm/1700-1800lm
Light efficiency: 80 ~ 90 lm / W
Color rendering index: >68
Color temperature: 3000-3500K/4000-6000K/7000-10000K
Ambient temperature: -20 ° C ~ 45 ° C
Surface temperature: 42 ° C ~ 45 ° C
Input voltage: AC100-240V
Working frequency: 50/60Hz
Power factor: 0.95 ~ 0.98
Service life: >30000H
Irradiation angle: 180 degree luminous flux: 800-900lm/1700-1800lm
Light efficiency: 80 ~ 90 lm / W
Color rendering index: >68
Color temperature: 3000-3500K/4000-6000K/7000-10000K
Ambient temperature: -20 ° C ~ 45 ° C
Surface temperature: 42 ° C ~ 45 ° C
The advantages of LED fluorescent lamps and ordinary fluorescent lamps are as follows:
1, energy saving.
2, long life, up to 50,000 hours or more.
3, the applicability is good, because the single LED is small in size and can be made into any shape.
4, the response time is short, is the response time of the ns (nanosecond) level, and the ordinary luminaire is the response time of the ms (millisecond) level.
5, environmental protection, no harmful metals, waste is easy to recycle.
6, the color is beautiful, the color of the illuminating color is pure, the spectral range is narrow, and it can be mixed into the colorful or white light through the red, green and blue three primary colors.
LED features and benefits 　
The intrinsic characteristics of the LED determine that it is the most ideal light source to replace the traditional light source, and it has a wide range of uses.
A small LED is basically a small chip that is encapsulated in epoxy, so it is very small and very light.
Low power consumption LED consumption is very low, generally the operating voltage of the LED is 2-3.6V. The operating current is 0.02-0.03A. This means that it consumes no more than 0.1W.
Long service life LEDs have a service life of up to 50,000 hours at the right current and voltage
High-brightness, low-calorie, environmentally friendly LEDs are made of non-toxic materials, unlike mercury-containing fluorescent lamps, which can be recycled and reused.
Rugged LEDs are completely encapsulated in epoxy, which is stronger than bulbs and fluorescent tubes. There are no loose parts in the lamp body. These features make the LEDs hard to damage.
Â
Compatible with LED fluorescent tube applications:
1. Operation lines, production workshops, office buildings, home lighting, supermarkets, schools, hospitals, parking lots, advertising light boxes, and some lighting places that are difficult to replace and maintain.
2. Shopping malls, banks, hotels, restaurants, restaurants, exhibition halls, boutiques, clothing stores, jewelry stores, large shopping malls, furniture decoration lighting.
Welcome to contact
Contact:æŽé’18898355591
Mob phone
Belttt's Universal Solar Charger Controller can use in street and home. It's sealed waterproof design. Waterproof is IP67. The controller has programmable function advanced, can use key to adjust parameters.Also it has automatic temperture compensation function, controller automatic adjust charging Voltage. It's very suitable for home and outdoor use.
Universal Solar Charger Controller
Charge Controller,Universal Solar Charger Controller,Universal Solar Controller,Solar Panel Charge Controller
Guangzhou City Poojin Electronic Technology Co., Ltd. , https://www.inverter-belttt.com