Leifeng gantry milling machine special inverter can completely replace the imported inverter
Each machine factory in Dongguan 11KW milling machine motor, using a domestic 18.5KW inverter, the use of more than a year is broken, the inspection has no maintenance value, after the use of a Leifeng 11KW gantry milling machine-specific frequency converter effect Particularly good, currently used for two years, the inverter is normal.
Many customers do not have experience in using frequency converters. They only look at prices. For example, gantry milling machines generally require low frequency torque and large frequency converters. Many domestic frequency converters have low frequency torque, and there is no way to increase power consumption of the frequency converter. The motor uses 18.5KW inverter, so the cost is the same as the cost of buying an 11KW imported inverter. After using Leifeng inverter, it is not necessary to increase the inverter power, only need to select one and the motor, etc. The power of Leifeng inverter will be fine.
It can be seen that the use of Leifeng inverter completely replaces the imported inverter.
Leifeng inverter: imported quality domestic price
Leifeng gantry milling machine inverter Please note the following parameters:
Speed ​​signal source 0300: 3
Control signal source 0301:2
Acceleration time 113:5
Deceleration time 114: 2
Basic frequency 803:50
Motor vector control mode 012:2 (Asynchronous motor without PG card vector control)