Construction and maintenance of high-risk base station anti-theft alarm system
The number of field communication base stations of mobile Unicom Telecom's three major operators is large, widely distributed and difficult to maintain; many sites cannot implement timely manual inspection and maintenance. These base stations often have the theft of batteries, air-conditioner outdoor units, feeders and other major equipment. Such stations are classified as high-risk base stations. For high-risk base station building safety protection system, we must achieve the following objectives:
1. When someone illegally invades a base station, it first gives early warning and uses sound and light warning methods to prevent crimes from continuing to occur.
2. When the blocking is invalid, remote alarm information needs to be issued in time to notify the base station management and maintenance personnel to handle the alarm in time.
3. After the crime is over, it can provide effective criminal evidence and assist relevant departments to solve cases and crack down on criminals.
System construction:
In the construction of the base station security protection system, the HC-GSM-CX MMS alarm host developed by Shenzhen Huichao Technology Co., Ltd. was used as the overall base station (equipped with various wired and wireless detectors such as infrared, magnetic sensors, and wall vibration detection. Detectors, smoke detectors, flood detectors, etc., to detect the overall base station security project; at the same time the host equipped with treble speakers, in the process of voice, can achieve intercom, remote shouting, to discourage criminal activities continue to occur. After the continuation of the incident, the control panel of the alarm control unit (up to three cameras) controls the on-site image capture and sends it back to the system server, and sends the MMS picture on the GPRS channel to the relevant manager's phone for future evidence collection.) Battery, Air Conditioner Outdoor Unit , Adopting HC-GPS series alarm terminal developed by Shenzhen Huichao Technology Co., Ltd. After the GPS series anti-theft device function is stolen, it can be positioned and tracked up. On the one hand, the stolen equipment can be recovered, and on the other hand, crimes can be combated.
HC-GSM-CX MMS alarm host introduction:
HC-GSM-CX MMS alarm host, the host a total of 26 defense zones, editable defense zone is 1 to 16, 25,26 fixed zone non-variable wired 1 to 8 zone, the factory default corresponding name, you can change the name by SMS.
The main function:
1. On-site warning. When a wired accessory generates an alarm, if an alarm is set after multiple triggers, an alarm is generated after the number of triggers is reached, and a warning tone is emitted from the big black speaker each time it is triggered.
2. Telephone alarm, site capture. After the host generates an alarm, it first sends a short message to the 5 groups of phone numbers, and then sends an alarm message and a live picture to the platform. After sending a message, it sends a MMS message to 5 groups of phone numbers, and finally dials the first group of phone numbers. If you press "#" to confirm the alarm in the group phone number, the alarm number after the call is not dialed.
4. Remote telephone control, alarm handling (system default alarm does not call, if necessary, SMS can be opened)
5. Take the initiative to view the site. When the alarm system of the base station is not in alarm, the site picture of the base station can be actively obtained through a short message, and the site environment of the base station can be viewed at any time.
6. Alarm platform monitoring. When the terminal generates an alarm, an alarm dialog window will pop up on the monitoring platform. The platform can actively obtain base station picture information through the platform.
HC-GPS series anti-theft device terminal introduction (battery GPS anti-theft device as an example):
"Battery GPS anti-theft device" is the relevant operation and maintenance personnel that uploads the distributed communication point warning information to the center through GSM network voice and SMS channels, so that the alarm information can be processed in time and the security of the communication base station battery can be improved. The police content covered by this system should include: base station name, GPS coordinates (original battery installation coordinates, current coordinates), vibration alarm, exchange office code, base station code, and so on. In order to achieve the safety of the battery protection and operation and maintenance personnel of the police situation and timely and accurate treatment. The operation and maintenance personnel can provide timely and accurate follow-up to the police warning they received, locate the walking path of criminals and hide their nests, provide the public security agencies with strong evidence to solve the case, and find stolen batteries to protect the company's fixed assets from loss.
working principle:
The existing GPS anti-theft devices generally directly take the battery DC 2V/12V power supply, through the CPU to GPS, GSM / CDMA module linked together, when the host alarm occurs when the terminal will pass SMS or GPRS (or CDMA1X and other mobile communication systems ) Continuously send data to the system. The system organizes the data and transmits the data to the customer's user software via the Internet. The location of the real goods on the computer and mobile phone follow.
High-risk base station anti-theft alarm system construction and preparation basis:
GB50348-2004 "Technical Code for Safety Technology Prevention Specification"
GA/T70-94 "Measures for the preparation of budgets for safety precautions"
GA/T74-2000 "General Graphics Symbols for Security Systems"
GB20815-2006 "Video Security Monitoring Digital Video Equipment"
GB50174-93 "Design Specification for Computer Room"
GB4943-95 "Safety of Information Technology Equipment (including Electrical Services Equipment)"
......
High-risk base station anti-theft alarm system maintenance requirements:
The high-risk base station anti-theft alarm system built by Shenzhen Huichao Technology Co., Ltd. will have a company responsible for regular inspections to ensure that the system is working properly. The system warranty period is unified for 3 years.