This guide is applicable to export lighting products, mainly fixed lamps (chandeliers, wall lamps and ceiling lamps, etc.) with a power supply voltage not exceeding 1 000 V, with tungsten lamps, tubular fluorescent lamps and other discharge lamps as light sources, and the power supply voltage not exceeding 250 V portable universal lamps (table lamps, floor lamps and bedside lamps, etc.) with tungsten lamps, tubular fluorescent lamps and other discharge lamps as light sources.
This guide focuses on major export destination markets such as the European Union, North America, Hong Kong, Saudi Arabia, Australia, New Zealand and Japan (the product exports more than 80% of the total exports to the above market).
This guide describes the analysis of international standards, conformity assessment procedures (CB certification) and China's differences, EU market technical regulations and conformity assessment procedures and China's differences, North American market technical standards and safety certification and China's differences, Australia and New Zealand The difference between the technical standards and conformity assessment procedures of the market and China, the safety certification procedures in Hong Kong, the differences between Saudi standards and safety certifications, the differences between Japanese standards and safety certifications, and the simple ways in which products enter countries. The guide has studied and analyzed 6 export target countries and regions; 7 technical regulations; 18 standards (7 in the EU, 2 in North America, 3 in Australia and New Zealand, 3 in Saudi Arabia, 3 in Japan); 7 conformity assessment procedures ( Safety certification procedures); summarizing technical standards differences (18 standards) in 5 countries and regions; 3 other technical access conditions (CB certification, IEC standards), and 6 recommendations for export enterprises.
The deadline for the technical sources of this guide is December 2004.
table of Contents
Chapter 1 Scope of Application
Chapter II Overview of the Basic Situation of China's Lamp Exports
1. Overview of the basic situation of fixed lamp export
2. Overview of the basic situation of the export of portable lamps
3. The main advantages of China's products in the international market and the analysis of the competitiveness of China's lighting products in the international market
4. Introduction to potential target market
5. Main factors affecting the export of China's lamps
Chapter III Differences between International Standards and Technical Specifications and China
1. Overview of IEC International Standards and China's GB Standards 6
2. Differences between IEC international standards and national lighting standards in China
3. CB system for international electrical product qualification testing and certification system
Chapter IV Differences between Technical Regulations, Standards and Conformity Assessment Procedures for Export Target Markets and China
1 Overview
2. Technical regulations, standards and certification procedures for each major export market (see Table 9)
3, China's related lighting electrical safety CCC certification
4. European Union (EU)
5, the United States UL (CSA Canada)
6, Canada's CSA safety certification
7. Australia, New Zealand technical regulations, standards and conformity assessment procedures
8. Technical regulations, standards and conformity assessment procedures for lamps in Saudi Arabia
9, PSE mark - Japanese product safety mark
10. Introduction to the Hong Kong Electrical Products (Safety) Regulations
Chapter 5 Suggestions for Meeting the Technical Requirements of the Target Market
1. Chinese lamps have a large space for development in the world.
2. Export market
3. Status of China's lamps and enterprises
4. How can China's lighting companies meet the requirements of many international technical regulations?
Appendix Appendix A: CB Test Certificate Application Appendix 2: Guangzhou Daily Electrical Appliance Inspection Institute CE Certification Form and Testing Service Annex III: CE Certification Application Form Annex IV: US UL Certification Company Annex 5: UL 1598 and UL153 Standards Standard Annex VI: UL Applicant and Listed Personnel Information Annex VII: UL Manufacturer Information Annex VIII: UL Product Parts List Annex IX: UL Certification Certificate Sample Annex 10: UL Terminology Interpretation Annex XI: Product Certification Preliminary Application Form Annex XII: Annex 13 of Hong Kong Safety Certification Application Form: Certification of Foreign Countries
The authenticity of this information has not been confirmed by the international electrical network, for your reference only.
This guide focuses on major export destination markets such as the European Union, North America, Hong Kong, Saudi Arabia, Australia, New Zealand and Japan (the product exports more than 80% of the total exports to the above market).
This guide describes the analysis of international standards, conformity assessment procedures (CB certification) and China's differences, EU market technical regulations and conformity assessment procedures and China's differences, North American market technical standards and safety certification and China's differences, Australia and New Zealand The difference between the technical standards and conformity assessment procedures of the market and China, the safety certification procedures in Hong Kong, the differences between Saudi standards and safety certifications, the differences between Japanese standards and safety certifications, and the simple ways in which products enter countries. The guide has studied and analyzed 6 export target countries and regions; 7 technical regulations; 18 standards (7 in the EU, 2 in North America, 3 in Australia and New Zealand, 3 in Saudi Arabia, 3 in Japan); 7 conformity assessment procedures ( Safety certification procedures); summarizing technical standards differences (18 standards) in 5 countries and regions; 3 other technical access conditions (CB certification, IEC standards), and 6 recommendations for export enterprises.
The deadline for the technical sources of this guide is December 2004.
table of Contents
Chapter 1 Scope of Application
Chapter II Overview of the Basic Situation of China's Lamp Exports
1. Overview of the basic situation of fixed lamp export
2. Overview of the basic situation of the export of portable lamps
3. The main advantages of China's products in the international market and the analysis of the competitiveness of China's lighting products in the international market
4. Introduction to potential target market
5. Main factors affecting the export of China's lamps
Chapter III Differences between International Standards and Technical Specifications and China
1. Overview of IEC International Standards and China's GB Standards 6
2. Differences between IEC international standards and national lighting standards in China
3. CB system for international electrical product qualification testing and certification system
Chapter IV Differences between Technical Regulations, Standards and Conformity Assessment Procedures for Export Target Markets and China
1 Overview
2. Technical regulations, standards and certification procedures for each major export market (see Table 9)
3, China's related lighting electrical safety CCC certification
4. European Union (EU)
5, the United States UL (CSA Canada)
6, Canada's CSA safety certification
7. Australia, New Zealand technical regulations, standards and conformity assessment procedures
8. Technical regulations, standards and conformity assessment procedures for lamps in Saudi Arabia
9, PSE mark - Japanese product safety mark
10. Introduction to the Hong Kong Electrical Products (Safety) Regulations
Chapter 5 Suggestions for Meeting the Technical Requirements of the Target Market
1. Chinese lamps have a large space for development in the world.
2. Export market
3. Status of China's lamps and enterprises
4. How can China's lighting companies meet the requirements of many international technical regulations?
Appendix Appendix A: CB Test Certificate Application Appendix 2: Guangzhou Daily Electrical Appliance Inspection Institute CE Certification Form and Testing Service Annex III: CE Certification Application Form Annex IV: US UL Certification Company Annex 5: UL 1598 and UL153 Standards Standard Annex VI: UL Applicant and Listed Personnel Information Annex VII: UL Manufacturer Information Annex VIII: UL Product Parts List Annex IX: UL Certification Certificate Sample Annex 10: UL Terminology Interpretation Annex XI: Product Certification Preliminary Application Form Annex XII: Annex 13 of Hong Kong Safety Certification Application Form: Certification of Foreign Countries
The authenticity of this information has not been confirmed by the international electrical network, for your reference only.
door opener keychain no touch,no touch keychain,no touch tool keychain,no touch keychain bulk, no touch keychain wholesale
Shenzhen Konchang Electronic Technology Co.,Ltd , https://www.konchang.com