Megatro Mickey Pylon Expoted to South America

MEGATRO Mickey Pylon is a 32 metres tall double-deadend pole-type 230-kV powerline pylon in front of Osceola Substation, which is used for the power supply of Disney World. The Mickey Pylon is in the form of a stylized Mickey Mouse head. It consists of a 21.3 metres high pole carrying a circular steel tube ring 9.1 metres in diameter weighing 13.608 tons, at which two smaller elliptical rings with axis lengths of 5.5 and 6.1 metres and a weight of 2.495 tons are attached. It is located along Interstate 4 on the north side of the highway, at the junction with World Drive and the Central Florida GreeneWay.
As the rings were not transportable on public roads, they were designed for an assembly at the construction site.
Each ring is constructed from galvanized steel tubing with a cross section of 0.305 m x 0.508 m.
The support pole was fabricated by North American Pole Corp. (NAPCO), Dallas, Texas, USA, while the rings were bent by Bend-Tec of Duluth, Minnesota, USA from steel tubes manufactured in Chicago, Illinois, USA and transported to NAPCO for galvanization.
The Mickey Pylon can be illuminated at night by fiber-optic cables at the rings, which are fed from a laser installed at the ground through a telecommunications-grade fiber running inside the pole.
Polymer insulators are used to minimize visual effects.


  MEGATRO Mickey Pylon is a 32 metres tall double-deadend pole-type 230-kV powerline pylon in front of Osceola Substation, which is used for the power supply of Disney World. The Mickey Pylon is in the form of a stylized Mickey Mouse head. It consists of a 21.3 metres high pole carrying a circular steel tube ring 9.1 metres in diameter weighing 13.608 tons, at which two smaller elliptical rings with axis lengths of 5.5 and 6.1 metres and a weight of 2.495 tons are attached. It is located along Interstate 4 on the north side of the highway, at the junction with World Drive and the Central Florida GreeneWay.
As the rings were not transportable on public roads, they were designed for an assembly at the construction site.
Each ring is constructed from galvanized steel tubing with a cross section of 0.305 m x 0.508 m.
The support pole was fabricated by North American Pole Corp. (NAPCO), Dallas, Texas, USA, while the rings were bent by Bend-Tec of Duluth, Minnesota, USA from steel tubes manufactured in Chicago, Illinois, USA and transported to NAPCO for galvanization.
The Mickey Pylon can be illuminated at night by fiber-optic cables at the rings, which are fed from a laser installed at the ground through a telecommunications-grade fiber running inside the pole.
Polymer insulators are used to minimize visual effects.


 

CAT6 Surface Mount Box

Our Surface Mount Box could include the CAT5E CAT6 CAT6A RJ45 Connectors

The surface mount box is an ideal for wall box and wire installation, we design many junction box, back mount box, blank mount box, loaded surface mount box.

Mateiral: ABS, PBT UL94V-0

1~8 ports and colors supply for your choice, they are an ideal for low voltage application for your security, data, networking solutions and telecom projects.

CAT6 Surface Mount Box,Category 6 surface mount box,cat6 surface mount jack,cat6 wall mount box

NINGBO UONICORE ELECTRONICS CO., LTD , https://www.uniconmelectronics.com