NEC released four LCD panels with white LED backlights

On May 11, 2009, NEC LCD Technology released four LCD panel modules with backlights for white LEDs. They are 15 inch NL10276BC30-34D, 10.5 inch NL10276BC20-18, 9 inch NL8048BC24-09D and 7 inch NL8048BC19-11D. It has a long life, 70,000 hours at room temperature (25 °C) and 60,000 hours at high temperature (70 °C). Mainly used in industrial equipment such as measuring instruments and FA control.

The pixels for the 15-inch product and the 10.5-inch product are 1024768 (XGA). The brightness is 400 cd/m2. In terms of contrast, the 15-inch product is 500 to 1, and the 10.4-inch product is 900 to 1. The viewing angle is 160 degrees above and below (the contrast is 10 to 1 or more). The operating temperature range is -20 to +70 ° C for 15-inch products and -30 to +80 ° C for 10.4 inches. In terms of power consumption, the 15-inch product is 10.6W and the 10.4-inch product is 5W.

The pixels for the 9-inch and 7-inch products are 800480 (widescreen VGA). The brightness is 400 cd/m2, the contrast ratio is 600 to 1, the viewing angle is 176 degrees (the contrast ratio is 10 to 1 or more), and the operating temperature range is -30 to +80 °C. In terms of power consumption, the 9-inch product is 4.5W, and the 7-inch product is 4.1W.

Sample shipments are scheduled to begin after June 2009. The sample price is 80,000 yen for a 15-inch product, 70,000 yen for a 10.5-inch product, 60,000 yen for a 9-inch product, and 50,000 yen for a 7-inch product.

NEC LCD Technology is scheduled to be held at the 12th Embedded Systems Development Technology Exhibition (ESEC) held at the Tokyo International Convention and Exhibition Center from May 13th to 15th, 2009, and held in San Antonio, USA from May 31st to June 5th, 2009. SID (Society for Information Display) 2009 exhibited 15 inch and 10.4 inch products.

The global solar market will reach 70 billion US dollars in 20132009-05-20
Government procurement, universal energy saving, no longer wearing 镣铐 dance 2009-05-20
US Improves Energy Efficiency Standards for Fluorescent and Incandescent Reflectors 2009-05-20
5 suggestions for the development of China's semiconductor lighting industry 2009-05-20
First opening the first river Linan energy-saving lamp industry wage collective consultation 2009-05-20



1

Prototype PCB , also could call PCB Prototype . It's the PCB Board just finished design and need manufacture some small quantity PCB for testing. Normally, for the PCB manufacture job less than 0.2SQM, we would treat it as PCB prototype job. And for PCB prototype job, we could do 24 hours expedite service for 1-2 layer PCB, 48 hours expedite service for 4 layer PCB and 72 hours expedite service for 6 layer PCB.

The copper is the circuits material and the circuits designed by the PCB designers. Depends on the current in the circuits, the PCB copper thickness could be done with 0.5oz-10oz. But the PCB designers need be noted that the copper track width/space need be enlarged with the thickness. For example, the minimum copper track width/space could be 3mil/3mil with 0.5oz, but would be 4mil/4mil with 1oz.

 

The PCB board could be rigid PCB, could be flex PCB and also could be Flex-Rigid PCB. And the materials could be FR4, PI, Aluminum, Copper-based, Rogers, Teflon, etc. They have different applications. For example, FR4 PCB is the most commonly used for rigid PCB and almost good for all electronics products; PI is the most commonly used for flex PCB; Aluminum and copper-based have good thermal diffusivity and always used for LED PCB ; Rogers PCB and Teflon PCB are always used for High Frequency PCB, etc.

 

We are the one-stop shop for all kinds of PCB manufacture service from PCB prototype to big volume, which could save our customers a lot of time and money.

 

PCB Manufacture Capabilities

 

PCB Products Show

PCB Factory Show

Prototype PCB

Prototype PCB,Professional PCB prototype,PCB Circuit Board,Multilayer PCB Circuit Board

ZhongFeng Electronic Technology Co., Limited , http://www.1pcbassembly.com