Lighting Japan 2011 was officially launched. The lighting technology of Lighting Japan is focused on the LED part. However, a few operators also showcased OLED lighting test works, and other manufacturers are mainly Japanese. Among them, Toyota Gosei (TG), the second largest LED chip manufacturer in Japan, has demonstrated a series of high-power (Low Power) and low-power (LED) components. The company has also emphasized the development of various home and office LEDs. Lighting fixtures, there are also designers to explain the design concept of LED lighting products. It shows that Toyota Synthetic has started the consistent production mode from LED chips to LED downstream products, and has moved from the past manufacturing industry to the design field. At present, Toyota Synthetic customers are enterprise customers. Mainly, some are also customized products.
In addition to the consistent production of LED lighting, Rohm, another Japanese lighting manufacturer, has also introduced panels for OLED lighting. The company's LED lighting products are mainly indoor lighting, including LED bulbs, LED straight tube lamps, etc. Among them, LED bulbs, the development of "3D Model" series of products, mainly emphasizes that the LED illumination angle from the original 150 degrees, spread to 180 degrees, Since the LED component is stacked in a ring, the product is named "3D".
Rohm is one of the few OLED manufacturers in the Lighting Japan 2011 venue. One of the largest OLED panels with a length and width of 145mm is only 4.1mm thick. However, because the product is still in the trial production stage, only the sample is in the network. Sold on the road, the price of a single piece is 30,000 yen (about NT$10,600).
In order to make the lighting fixtures smaller, in addition to the development of OLEDs, the LED lighting is also oriented toward a thinner design. In this exhibition, the factory light wave develops LED ceiling light with a thickness of only 9.5mm. Compared with the traditional fluorescent lamp, the thickness of the lamp is up to 100mm, and the thickness is greatly reduced. Therefore, when installing ultra-thin LED lighting, the ceiling does not need to be re-installed. construction. Other benefits include the advantages of being light and not taking up space and facilitating handling.
Looking at the development trend of major LED lighting manufacturers in Japan, in addition to the development of indoor and outdoor LED lighting series, directly replacing traditional lighting, it also plays the role of LED lighting is lighter and thinner than fluorescent lamps, and the appearance of lamps is easier to design, and so on. Concerning the development trend of OLED lighting, although not as fast as expected, the Japanese factory has prioritized the layout of OLED lighting, waiting for the OLED lighting technology to mature, will be introduced into the market.
Application:
The electric cable tray system are widely used for:
1.railway bridge cables laying
2.highway bridge cables laying
3.petrochemical engineering cables laying
4.post and telecommunication cables laying
5.computer cables laying
Tray Type Corrosion Resistance Cable Tray
Stainless Steel Cable Tray,High Corrosion Resistant Cable Tray,Corrosion Resistance Cable Tray,Steel Ventilated Perforated Cable Tray
Jiangsu Loncin Electrical Equipment Co.,Ltd , http://www.loncincabletray.com