Anchor Dead End Clamp for Self Support ABC Cable

                  2.1ABC Cable Aerial Electrical Fittings Anchoring Connector

 Introduction
 The anchoring clamp is designed to anchor LVABC lines with insulated neutral messenger.
 The stainlessteel flexible bail is equipped with an movable insulating saddle and the  two sleeves are compressed on the ends and locked on the clamp body. 

  Feature
 1.High mechanical stability
 2. Reduced dimensions for easier handling
 3. The cable gripping device avoids damage to sheath

  

(Performance testing) 
2.1 Mechanical performance:the grip force of the wire clamp is 1/10 bigger than the break force of the lead. It comply with GB2314-1997 
2.2 Temperature rise performance: under the conditìon of big current, the temperature rise of connector is less than that of connection lead.
2.3 Heat circle performance:confirms to GB/T2317.3-2000,the beat circle trial standard for electric fitting. 
2.4 Waterproof insulatìon performance:confirms to the relevant requirements in Part 2 of GB/TI3140.4-1998, 
2.5 Resistance to corrosion performance: under the conditìon of SO, and salt fog, it can do three tìmes of fourteen days circle testìng. 
2.6 Environmental aging performance:under the circumstance of ultraviolet, radiation, dry and moist, expose if with change of temperature and beat impulse for six weeks. 
2.7 Fire-proof performance: insulation material of the connector withstands glowing filament test. Confirm to the requirements in Chapter4-1 0 of GBrr5169.4

                  2.1ABC Cable Aerial Electrical Fittings Anchoring Connector

 Introduction
 The anchoring clamp is designed to anchor LVABC lines with insulated neutral messenger.
 The stainlessteel flexible bail is equipped with an movable insulating saddle and the  two sleeves are compressed on the ends and locked on the clamp body. 

  Feature
 1.High mechanical stability
 2. Reduced dimensions for easier handling
 3. The cable gripping device avoids damage to sheath

  

(Performance testing) 
2.1 Mechanical performance:the grip force of the wire clamp is 1/10 bigger than the break force of the lead. It comply with GB2314-1997 
2.2 Temperature rise performance: under the conditìon of big current, the temperature rise of connector is less than that of connection lead.
2.3 Heat circle performance:confirms to GB/T2317.3-2000,the beat circle trial standard for electric fitting. 
2.4 Waterproof insulatìon performance:confirms to the relevant requirements in Part 2 of GB/TI3140.4-1998, 
2.5 Resistance to corrosion performance: under the conditìon of SO, and salt fog, it can do three tìmes of fourteen days circle testìng. 
2.6 Environmental aging performance:under the circumstance of ultraviolet, radiation, dry and moist, expose if with change of temperature and beat impulse for six weeks. 
2.7 Fire-proof performance: insulation material of the connector withstands glowing filament test. Confirm to the requirements in Chapter4-1 0 of GBrr5169.4

stainless material,never be rusty.easy to install,just press the Diffuser Strip Light into the bracket until it is fixed well.Before installation,put the bracket on any place you want,then use the attached screw to fix. In ordet to fix the led srtips,three brackets per meter is enough.And you can rotate the bracket to make the shape ,of course the basic position should be confirmed before fixing the brackets.paticular design,make the strips different from other products,the brackets are only attached strip light,not sold separately.

Mounting Brackets

Mounting Brackets,Led Mounting Brackets,Metal Mounting Brackets,Wall Mount Bracket

Guangdong Kamtat Lighting Technology Joint Stock Co., Ltd. , http://www.ip68ledstrip.com