16 Cores Fiber Distribution/Termination Box with Pigtail and Adapter Inside

FTKS-1805-16D       16 Cores Fiber Distribution/termination Box with pigtail and adapter inside

1.Product Description

The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.

2.Features

1.Total enclosed structure;
2.Material: PC+ABS,wet-proof,water-proof,dust-proof,anti-aging, protection level up to IP65;
3.Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one;
4.Cable,pigtails,patch cords are running through own path without disturbing each other, cassette type SC/LC/PLC adaptor installation, easy maintenance;
5.Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation;
6.Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses;

3.Specification

1. Environmental requirement
Working temperature:-40ºC~+85ºC;
Relative humidity≤85%(+30ºC);
Atmospheric pressure:70KPa~106Kpa;

2. Main technical datasheet
Insertion loss≤0.2dB;
UPC return loss≥50dB;
APC return loss≥60dB;
Life of insertion and extraction>1000 times;

3. Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation resistance is less than 2MΩ/500V(DC);IR≥2MΩ/500V;
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover;U≥3000V;
 
4.Configuration table

Table 1 Model and configuration
5.Product cable ways

1.Cover;
2.Base;
3.Lock;
4.Water-proof cable gland;
5.Main cable fixer;
6.Main cable force fixer;
7.Adaptor;
8.Adaptor Bracket;
9.Dust-free blocker;
10.flap plate;
11.heat protector Pic 3  Cable ways;

6.Installation

1.Wall-mounted installation;
Drill 4 holes over the wall based on the size in table 1,place the expansion bolt Φ7.5*40,place the box to match up the holes and use bolt to fasten;
2.Pole-mounted installation;
   Fix 1 set of the easy pole ring to the telecom pole;

7.Accessories

1. Users' Manual*1;
2. Key*1;
3. Accessories Bag * 1;
4. Easy pole ring*2.(Option);

8.Application

1.Telecommunication subscriber loop;
2.FTTH/FTTX/LAN/WAN;

9.Item images and certifications:








10.Company Information

Takfly, established in 2000, has been manufacturing and exporting fiber cable, adapter, attenuator, connector, coupler, splitter, termination box, ODF, fiber instruments, media conceiver, switch, optical module, CWDM/DWDM, etc. Takfly's products have passed the management verification: ISO14001: 2004. and goods have passed RoHS, CE, FCC, REACH, EN50575, ISO9001, etc.

So far, Our products have been widely installed in many big worldwide project and work perfectly. Many project contactors ask the first and second operators to purchase fiber items from Takfly for their new project. In addition, we also have builted long term cooperation with Lapp, Amper, Telefonica, orange and Ericsson. All enquiry are warmly welcomed here no matter it's small or big, we promise to provide all customers high quality and good price item.
11.Why choose Takfly?

Service

1.Customer's logo: Acceptable;
2.General inspection on fixing before packing;
3.Third party inspection: Acceptable;
 
Quality Control

All products must go through five checks before manufacturing process;
1.Material incoming inspection before production;
2.Full check after every individual process finished;
3.Full check after production half-done;
4.Full check before packing;
5.Spots check after production packed before shipping;
 
Advantage

1.15 years experience in manufacturing fiber optic products;
2.Availability of R & D with more than 10 engineers;
3.Available of design and making mold with special molding house;
4.High quality, attractive price and fast delivery(2-7days);
5.OEM, ODM customer designs are also welcomed;
6.More than 200 workers;
7.Excellent service;
 
Delivery

1.Packing: Plastic bag& carton, Neutral packing or as your required;
2.Sample time: 1-3 days after confirm;
3.Order lead time: 2-7working days depend on quantity and products;
4.Shipping port: Shenzhen China or HK;
5.Shipping term: EXW or FOB;
 
Shipping 

1.Once confirmed the order, and payment sent after finishing goods;
2.Goods will be sent within 7 days with the fast, reasonable and efficient shipping mode such as DHL, EMS, UPS,FEDEX, TNT, etc;
3.Please make sure your postal address is correct. Any lost and mistakes because  of wrong address are not supplier's responsibility;
4.Please do not bid if you disagree with the shipping and handling charge;
 

Pls kindly note we not only wanna to seek an opportunity to work with you, but also regard you as our friend. All inquiries from your side will be warmly welcomed here. You can call at 0086 13537892205 to reach me.
 
  FTKS-1805-16D       16 Cores Fiber Distribution/termination Box with pigtail and adapter inside

1.Product Description

The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.

2.Features

1.Total enclosed structure;
2.Material: PC+ABS,wet-proof,water-proof,dust-proof,anti-aging, protection level up to IP65;
3.Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one;
4.Cable,pigtails,patch cords are running through own path without disturbing each other, cassette type SC/LC/PLC adaptor installation, easy maintenance;
5.Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation;
6.Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses;

3.Specification

1. Environmental requirement
Working temperature:-40ºC~+85ºC;
Relative humidity≤85%(+30ºC);
Atmospheric pressure:70KPa~106Kpa;

2. Main technical datasheet
Insertion loss≤0.2dB;
UPC return loss≥50dB;
APC return loss≥60dB;
Life of insertion and extraction>1000 times;

3. Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation resistance is less than 2MΩ/500V(DC);IR≥2MΩ/500V;
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover;U≥3000V;
 
4.Configuration table

Table 1 Model and configuration
5.Product cable ways

1.Cover;
2.Base;
3.Lock;
4.Water-proof cable gland;
5.Main cable fixer;
6.Main cable force fixer;
7.Adaptor;
8.Adaptor Bracket;
9.Dust-free blocker;
10.flap plate;
11.heat protector Pic 3  Cable ways;

6.Installation

1.Wall-mounted installation;
Drill 4 holes over the wall based on the size in table 1,place the expansion bolt Φ7.5*40,place the box to match up the holes and use bolt to fasten;
2.Pole-mounted installation;
   Fix 1 set of the easy pole ring to the telecom pole;

7.Accessories

1. Users' Manual*1;
2. Key*1;
3. Accessories Bag * 1;
4. Easy pole ring*2.(Option);

8.Application

1.Telecommunication subscriber loop;
2.FTTH/FTTX/LAN/WAN;

9.Item images and certifications:








10.Company Information

Takfly, established in 2000, has been manufacturing and exporting fiber cable, adapter, attenuator, connector, coupler, splitter, termination box, ODF, fiber instruments, media conceiver, switch, optical module, CWDM/DWDM, etc. Takfly's products have passed the management verification: ISO14001: 2004. and goods have passed RoHS, CE, FCC, REACH, EN50575, ISO9001, etc.

So far, Our products have been widely installed in many big worldwide project and work perfectly. Many project contactors ask the first and second operators to purchase fiber items from Takfly for their new project. In addition, we also have builted long term cooperation with Lapp, Amper, Telefonica, orange and Ericsson. All enquiry are warmly welcomed here no matter it's small or big, we promise to provide all customers high quality and good price item.
11.Why choose Takfly?

Service

1.Customer's logo: Acceptable;
2.General inspection on fixing before packing;
3.Third party inspection: Acceptable;
 
Quality Control

All products must go through five checks before manufacturing process;
1.Material incoming inspection before production;
2.Full check after every individual process finished;
3.Full check after production half-done;
4.Full check before packing;
5.Spots check after production packed before shipping;
 
Advantage

1.15 years experience in manufacturing fiber optic products;
2.Availability of R & D with more than 10 engineers;
3.Available of design and making mold with special molding house;
4.High quality, attractive price and fast delivery(2-7days);
5.OEM, ODM customer designs are also welcomed;
6.More than 200 workers;
7.Excellent service;
 
Delivery

1.Packing: Plastic bag& carton, Neutral packing or as your required;
2.Sample time: 1-3 days after confirm;
3.Order lead time: 2-7working days depend on quantity and products;
4.Shipping port: Shenzhen China or HK;
5.Shipping term: EXW or FOB;
 
Shipping 

1.Once confirmed the order, and payment sent after finishing goods;
2.Goods will be sent within 7 days with the fast, reasonable and efficient shipping mode such as DHL, EMS, UPS,FEDEX, TNT, etc;
3.Please make sure your postal address is correct. Any lost and mistakes because  of wrong address are not supplier's responsibility;
4.Please do not bid if you disagree with the shipping and handling charge;
 

Pls kindly note we not only wanna to seek an opportunity to work with you, but also regard you as our friend. All inquiries from your side will be warmly welcomed here. You can call at 0086 13537892205 to reach me.
 
 

Multi USB Charger

• [Compact Design & Family-Sized:]Compact design frees valuable desk space while non-slip grip keeps it from being knocked off. 6 high powered ports lets you charge any combination of phones, tablets or other USB-charged devices simultaneously

• [Guaranteed Safety]Overcharging, overheating and short circuit protection. CE,FCC & RoHS certified design, industry grade materials and premium circuitry ensure superior performance and reliability

• Brand Name: OEM

  Product Name: Multi USB Charger

  Use: Mobile Phone

  Place of Origin: Guangdong, China (Mainland)

  Port: 6 port

  Input: AC100-240V 50/60HZ

  Size: 90*70*16mm

  Weight: 250g

  Materials: PC+ABS

  Color: Black/White

  Warranty: 1 year

Multi USB Charger,Multi Usb Wall Charger,Multiple Usb Port Charger,Multi Port USB Charger

Shenzhen Waweis Technology Co., Ltd. , https://www.laptopsasdapter.com