Design of Automobile Hybrid Gateway Based on CAN / LIN Interest Line

Application of GM7130 / 7230 in automotive electronics

In the modern society, with the accelerated integration of the automobile industry and the electronic information industry, automobiles have begun to develop in the direction of electronics, multimedia and intelligence. From mechanical products to advanced mechatronics products, electronic devices account for the entire vehicle ( Especially the proportion of the value of cars) gradually increased. Various chip design and production companies at home and abroad have also aimed at this field, introducing a wide variety of power chips with different functions. It can be said that every automotive electronics engineer has a lot of samples to choose from. It is really not easy to choose a power chip that meets the requirements and has a higher cost performance!

GM7130 / 7230 is a step-down PWM voltage regulator chip provided by GAMMA. It is an original imported product. It can be functionally compatible with 2576/2596, each has its own advantages in performance, and has a better cost performance. The specific performance is introduced as follows:

· Maximum output current: 3A;

· Maximum input voltage: 40V, HV is 60V;

Output voltage: 3.3V, 5V, 12V and ADJ (adjustable) etc. optional;

· Vibration frequency: GM7130 is 52kHz; GM7230 is 150kHz;

· Conversion efficiency: 75% ～ 88% (different efficiency at different voltage output);

· Output accuracy: ± 2%;

· Control mode: PWM;

· Working temperature range: -40 ℃ ～ + 125 ℃

· Working mode: low power consumption / normal two modes can be controlled externally;

· Working mode control: TTL level compatible;

· Required external components: only four (non-adjustable) or six (adjustable);

· Device protection: thermal shutdown and current limit;

· Package: TO-220 or TO-263.

In practical applications, the GM7130 / 7230, which complies with vehicle regulations, is used by many automotive electronics manufacturers and is used in products such as car taillights, car audio, car instrumentation, signal lights, and GPS navigators. Work normally in harsh environments such as high temperature and high current.

The GM7130 / 7230's maximum output current of 3A can meet the high current requirements including car taillights and signal lights, and can work normally under high current conditions for a long time. The maximum input voltage of 40V, the limit input voltage is 45V, under the normal car battery output 24V voltage, fully meet the requirements, even if a pulse voltage twice the input voltage is generated in a short time, it will not cause substantial damage to the chip (experiment It is proved that using a pulse voltage of 60V, the chip will not be damaged if it is continuously impacted 300 times in 1 second).

If the actual operating voltage exceeds 24V, it is recommended to choose the HV model-GM7130HV. GM7130 / 7230 can work normally in the temperature environment of -40 ℃ ~ +125 ℃, which meets the automotive requirements of the chip required by the car regulations. The thermal resistance of GM7130 / 7230 is 36 ℃ / W, which is much lower than the general thermal resistance of 50 ℃ / W, and generates less heat. At the same time, the large packages of TO-220 and TO-263 are convenient for heat dissipation, which can guarantee GM7130 / 7230 can work normally in the small space of the car.

In addition, the output accuracy of ± 2%, which is lower than the ± 4% output accuracy of the general product, and the accurate frequency of 52KHz, make the GM7130 / 7230 more stable output power, reduce the impact damage to the load, and ensure the entire system Working stability.

Door Lock Motor Characteristics 1. No direction: don't need to distinguish the door direction, left and right sides, both inside and outside the door, can be universal. (convenient purchase locks and reduce inventory). 

 

2. Power: the power consumption is only equivalent to one 5 of the electric control lock, electric lock, 3 A magnetic lock power to open the door, often consumes 0.27 A. And spiritual lock unlock instantaneous current is less than 0.5 A, reduced the entrance guard, talkback host power consumption.

3. No collision: close the door without collision, reduces the choice of door closers requirements (not necessarily with 65 kg of door closers, door closers are free to choose to suit the door), to solve the building door because the door closers clash of the hydrodynamic force is too high, it is not easy to make the door more deformation, prolong the service life of the body. 

4. The voice is light: close the door automatically locked, no noise, solves the noise due to electric control lock itself. 

5. Life is long, life is up to 350000 times

Door Lock Motor

Door Lock Motor,Mini Door Lock Motor,Door Lock Dc Motor,Door Lock Gear Motor

Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com