However, due to the particularity of the product itself, the installation and debugging of the LED display often reflects the quality of the product and determines the effect of the display when it is used. Therefore, the installation and commissioning of the LED display is a very important technical activity. Here, Xiaobian compiled and compiled five common installation methods in the LED display industry:
1. Mosaic installation: suitable for indoor screens with small area. Since the installation space is small, in order not to occupy the space, the same size area is dug on the wall according to the size of the screen body, and the LED display screen is embedded in the wall. The wall is required to be a solid wall. The method of pre-maintenance is costly.
2. Wall-mounted installation: It is suitable for the installation of indoor LED display. The area is small (10 square meters or less ) . The wall requirements are solid walls. Hollow bricks or simple partition walls are not suitable for this installation.
3. Hanging installation: It is suitable for large-scale places such as station LED electronic display and airport LED electronic display to play the role of indicating signs. The screen area is required to be small. (10 square meters or less ) requires a suitable installation location, such as a beam or lintel at the top, and the screen is usually covered with a back cover.
4. Column-type installation: It is mostly used for the installation of LED electronic display screens for outdoor advertising . It has a wide view and relatively empty places, such as squares and parking lots. According to the size of the screen body, it can be divided into single column and double column type.
5. Roof-mounted installation: It is mainly suitable for outdoor advertising LED electronic display. The installation location is mainly the roof of the building. The windproof level to be considered as the height of the building increases is also increased.
Description of self closing Wrap Around Cable Sleeve Wire Harness
PET White Self Wrapping Split Braided Sleeving for cable management (PET woven mesh tube) is braided by environment friendly polyester monofil. PET is with good flexibility, fire resistance, abrasive resistance and thermal insulation performance. The sleeving are smooth surface, bright color, various patterns.
self-closing wrap offers innovative solutions for the protection of breakout areas and provides easy removal when is necessary an inspection or maintenance of cables. The special open structure allows to be installed after other components, for example copper terminals and connectors.
flexible semi-rigid wrappable split Pet Braided Cable Sleeving is a perfect solution to protect wires, cables, wire harnesses where ease of installation is paramount. With a 50% overlap, this sleeving wraps securely to itself eliminating the need to secure the sleeving opening with any other method.
Self Closing Wrap is a non-Expandable Sleeve woven from monofilament weft and multi-filament warp.
It provides a lightweight, cost effective and tough solution for protection of a wide range of wire and cable.
Its inherent flexibility allows it to be bend, coil and fit with irregular shapes while its open design allows it to be install on finished assemblies quickly.
Wrap Around Cable Sleeve
Wrap Around Cable Sleeve,Sleeve For Wires ,Self Cable Wrap,Self Split Wrap
Shenzhen Huiyunhai Tech.Co.,Ltd , https://www.hyhbraidedsleeve.com