Product Name: Carrier Plate Tester
Carrier Plate Tester
Carrier Plate Tester
Carrier Plate Tester Price
Carrier Plate Tester
This device is ideal for measuring subgrade soil and grassroots directly on the road surface. It can accurately measure the resilience modulus of pavement materials and structural layers.
(Thickness in: 0.8-1.0m)
Main Technical Parameters:
Maximum Load: 60 kN
Carrier Plate Diameter: Ф 304 mm
Jack Line: 120 mm
Carrier Plate Tester Instructions
1. Install the load beam on the rear axle weight of a 10-ton truck. The distance from the rear of the 12T truck to the rear axle should be about 0.8 meters, and secure the load beam with clamping plates and fastening wires.
2. Choose a representative measurement point, sprinkle a small amount of even sand around it, place the carrier plate, and turn it so that the sand is evenly distributed and fills the small pit on the surface. Press the edge of the carrier plate with your fingers 2-3 times in a straight line to check if it is tilted.
3. Slowly start the vehicle so that the middle part of the load beam at the rear of the car is just above the carrier plate.
4. Place the hydraulic jack in the center of the carrier plate. If the height is insufficient, you can place a pad (multi-sleeper) under the jack to center it. You can also adjust the screw of the jack to fine-tune its position.
5. Position the deflection probes of the security deflection meter (self-prepared) on the leveling wires on both sides of the carrier plate. Attach the dial gauge of the deformation instrument at the end of the deflection meter.
We also offer similar products such as:
Permeator
Water content meter
Photoelectric liquid limit tester
Electric relative density meter
Soil long rod penetration instrument
, Short rod penetration instrument
Water content rapid tester
Surface vibration compaction tester
Pavement deflection instrument
Stone crusher
Penetration instrument
Soil sampler
Unconfined test mode
Needle-shaped gauge
Bearing ratio tester
ZQB-4
Light shear meter
WX - 2
Type photoelectric liquid plastic limit combined measuring instrument
WG-4
Lightweight consolidation instrument
Triple medium pressure consolidation instrument
SD-1
Soil relative density meter
1006
Slurry viscometer
LCB - 2
Type site CBR Value meter
HDSS-II road surface water permeability tester
, Pavement moisture permeation meter
Carrier Plate Tester
Manual hydraulic multi-purpose stripper
Rebound modulus tester
JM-III Type aggregate accelerated sander
SD-3 Electric sand equivalent tester
TLD-141 Electric stripper
DZY- Type II CNC Multi-function Electric Compactor
K-30 Plate load tester
SG-6, 8 Multifunctional direct reading calcium measuring instrument
STCT-1 Heavy duty probe
Mud three-piece tester
Light touch probe
Steel Structures can be used in many industries such as foundation reinforce, electric power transmission structures and tubular scaffolding, etc.
A flange can also be a plate or ring to form a rim at the end of a pipe when fastened to the pipe. A blind flange is a plate for covering or closing the end of a pipe. A flange joint is a connection of pipes, where the connecting pieces have flanges by which the parts are bolted together.
Although the word flange generally refers to the actual raised rim or lip of a fitting, many flanged plumbing fittings are themselves known as 'flanges':
There are many different flange standards to be found worldwide. To allow easy functionality and interchangeability, these are designed to have standardised dimensions. Common world standards include ASA/ASME (USA), PN/DIN (European), BS10 (British/Australian), and JIS/KS (Japanese/Korean). In the USA, ANSI stopped publishing B16.5 in 1996, and the standard is ASME B16.5
Steel Structures Carport,Substation Steel Structure Fabrication,Peb Steel Structure,Light Steel Structure
Yixing Steel Pole International Trading Co., Ltd , https://www.yx-steelpole.com